Use of geographical information systems as a tool for predicting fish yield in tropical reservoirs : case study on Sri Lankan reservoirs

Use of geographical information systems (GIS) in inland fisheries has hitherto been essentially restricted to site evaluation for aquaculture development and assessment of limnological changes in time and space in individual water bodies. The present GIS study was conducted on the land-use pattern of the catchments of nine reservoirs in Sri Lanka, for which detailed fishery data, viz. yield, fishing intensity, landing size of major constituent species, together with selected limnological data such as conductivity and chlorophyll-a, were available. Potential statistical relationships (linear, curvilinear, exponential and second-order polynomial) of fish yield (FY, in kg ha−1 yr−1) to different land-use patterns, such as forest cover (FC, in km2) and shrub-land (SL, in km2), either singly, or in combination, and/or the ratio of each land type to reservoir area (RA in km2) and reservoir capacity (RC in km3), were explored. Highly significant relationships were evident between FY to the ratio of SL and/or FC+SL to RA and/or RC. Similarly, the above land-use types to RA and RC ratios were significantly related to limnological features of the reservoirs. The relationships of FY to various parameters obtained in this study were much better correlated than those relationships of FY to limnological and biological parameters used in yield prediction in tropical and temperate lacustrine waters previously.

Yield, growth and mortality rate of the Thai river sprat, Clupeichthys aesarnensis, in Sirinthorn Reservoir, Thailand

The Thai river sprat, Clupeichthys aesarnensis Wongratana, is a clupeid with a short life span, and supports artisanal fisheries in a number of reservoirs in the Mekong Basin. The growth parameters, mortality rates and the status of the Thai river sprat in Sirinthorn Reservoir (28 800 ha), NE Thailand (15°N; 105°E), are presented. The fishery is based on lured lift-nets, operated 7–14 days in the new moon period, September to April each year. It was shown that the von Bertalanffy growth function (VBGF) model was L_t (mm) = 78.43[1 − exp{−0.211[t − (−0.7996)]}] and its growth conformed to an isometric pattern. Natural mortality rate (month−¹) was 0.13 month−¹. Total mortality rates ranged from 0.69 to 1.53 month−¹ depending on the weather and the fishing season. Recruitment was continuous throughout the year but peaked in June and July. The yield per recruit model indicated that the exploitation rate of this fishery is probably too high.

Determination of yield and erosion damage functions using subjectively elicited data: application to small holder tea in Sri Lanka

Tea has been Sri Lanka's major export earner for several decades. However, soil erosion on tea-producing land has had considerable on-site and off-site effects. This study quantifies soil erosion impacts for smallholder tea farms in Sri Lanka by estimating a yield damage function and an erosion damage function using a subjective elicitation technique. The Mitscherlich-Spillman type of function was found to yield acceptable results. The study indicates that high rates of soil erosion require earlier adoption of soil conservation measures than do low rates of erosion. Sensitivity analysis shows the optimum year to change to a conservation practice is very sensitive to the discount rate but less sensitive to the cost of production and price of tea.

Evaluation of the robustness of predictive yield models based on catchment characteristics using GIS for reservoir fisheries in Sri Lanka

Land-use patterns in the catchment areas of Sri Lankan reservoirs, which were quantified using Geographical Information Systems (GIS), were used to develop quantitative models for yield prediction. The validity of these models was evaluated through the application to five reservoirs that were not used in the development of the models, and by comparing with the actual fish yield data of these reservoirs collected by an independent body. The robustness of the predictive models developed was tested by principal component analysis (PCA) on limnological characteristics, land-use patterns of the catchments and fish yields. The predicted fish yields in five Sri Lankan reservoirs, using the empirical models based on the ratios of forest cover and/or shrub cover to reservoir capacity or reservoir area were in close agreement with the observed fish yields. The scores of PCA ordination of productivity-related limnological parameters and those of land-use patterns were linearly related to fish yields. The relationship between the PCA scores of limnological characteristics and land-use types had the appropriate algebraic form, which substantiates the influence of the limnological factors and land-use types on reservoir fish yields. It is suggested that the relatively high predictive power of the models developed on the basis of GIS methodologies can be used for more accurate assessment of reservoir fisheries. The study supports the importance and the need for an integrated management strategy for the whole watershed to enhance fish yields.

Improving the color yield of ink-jet printing on cationized cotton

This study examines the performance of digital ink-jet printing on cationized cotton treated with polyepichlorohydrin-dimethylamine (PECH-amine). The results show that the color yield of ink-jet printing with reactive inks on cationic modified cotton is much greater than that on untreated cotton. The effect on the increase of color yield by cationic modification is greater than that by preparation with alkali, urea, and thickener. The reason for this is that introducing positively charged sites increases dye uptake and dye fixation on cationized cotton. The results also show that cationic modification with PECH-amine decreases the rub fastness but increases the wash fastness of the treated cotton.

Culture-based fisheries in non-perennial reservoirs of Sri Lanka: influence of reservoir morphometry and stocking density on yield

Culture-based fish yield in non-perennial reservoirs of Sri Lanka was related to reservoir morphometry and stocking density. The reservoirs were stocked mainly with fingerlings of one Chinese and three Indian major carp species, common carp, Cyprinus carpio L., and the genetically improved farmed tilapia strain of Nile tilapia, Oreochromis niloticus (L.), at four pre-determined species combinations and a range of stocking densities [SD (fingerlings ha⁻¹)]. Twenty-three reservoirs were harvested successfully at the end of the culture period of 2002–2003. Basic limnological and morphometric parameters, including shoreline development (D_L) and shoreline area ratio (R_LA), were estimated for each of the 23 reservoirs. Bray–Curtis similarity and non-metric multidimensional scaling using mean values of limnological data revealed that reservoirs could be ordinated into two major clusters, one with intact sample distribution due to similar trophic characteristics and the other with scattered sample distribution. Reservoirs in the cluster with similar trophic characteristics showed significant correlation (P < 0.05) between R_LA and total fish yield (Y). A multiple regression equation, Y = −693 + 4810 R_LA + 0.484 SD, was generated to estimate fish harvest in relation to SD.

Determination of plastic yield stress from spherical indentation slope curve

The indentation slope curve from a spherical indentation on elastic-plastic materials is examined. By comparing it with that of an linear elastic material of the same elastic properties, we found that the start point of plastic yielding for an elastic-plastic material can be easily located from the indentation slope curve. Based on this analysis, a simple but effective method is proposed to measure the plastic yield stress of very small samples from a spherical nano-indentation slope curve.

Casting yield improvement in graphite iron castings

A well designed runner and feeding system should produce castings with minimal defects and low pour weight. This thesis investigates how the filling regime and solidification of the mould influences defects in the castings produced from that mould. Design guidelines to reduce such defects are proposed and tested. An existing shrinkage fault in a Grey Iron disc brake casting is simulated using a commercial finite-difference computer program. Three criteria are used to predict the defect and the effect of changes to the feeder geometry. Critical Fraction Solidification analysis is used to determine whether the feeder remains in liquid contact with the casting during solidification and this approach is shown to correctly predict the presence or absence of porosity* The feeder block is extended below the ingate of the casting to improve liquid contact between the casting and feeder without significantly increasing the feeder mass. Plant trials confirm the change to the feeder eliminates the porosity defect. The runner system and mould venting for a thin walled Ductile Iron casting are investigated. Trials show that by setting the total mould vent area to be greater than the net ingate area of the castings, the cold-shut frequency is halved. A method for runner system design based on peak linear flow velocity in the runner during mould filling is proposed. A new pressurised runner system produces castings with significantly fewer defects and reduced pour weight when runner areas are designed to maintain peak velocity below 1 m/s. Peak velocity and magnesium levels are demonstrated to be critical factors in the elimination of cold-shut defects. A pressurised runner system is also shown to isolate inclusion defects from castings more effectively than an unpressurised system. From this work, a technique is proposed which allows the yield of an existing runner and feeder system for iron castings to be improved with confidence in the results.

TOF-SIMS analysis using C60. Effect of impact energy on yield and damage

C₆₀ has been shown to give increased sputter yields and, hence, secondary ions when used as a primary particle in SIMS analysis. In addition, for many samples, there is also a reduction in damage accumulation following continued bombardment with the ion beam. In this paper, we report a study of the impact energy (up to 120 keV) of C₆₀ on the secondary ion yield from a number of samples with consideration of any variation in yield response over mass ranges up to m/z 2000. Although increased impact energy is expected to produce a corresponding increase in sputter yield/rate, it is important to investigate any increase in sample damage with increasing energy and, hence, efficiency of the ion beams. On our test samples including a metal, along with organic samples, there is a general increase in secondary ion yield of high-mass species with increasing impact energy. A corresponding reduction in the formation of low-mass fragments is also observed. Depth profiling of organic samples demonstrates that when using C₆₀, there does not appear to be any increase in damage evident in the mass spectra as the impact energy is increased.